Tension LS400

LS400 series through-axis tension sensor adopts imported full-bridge strain gauge (high-precision with temperature compensation) to detect, and through high-precision signal and temperature compensation processing, it has the characteristics of high precision, low temperature drift, good linearity, etc. The sensor can effectively shield static electricity and group pulse interference of frequency converter. With overload limit, can prevent overload damage to the sensor. The sensor has 30KG,50KG,100KG,200KG and other measuring ranges.

Tension LS500

LS500 series through-axis tension sensor adopts imported full-bridge strain gauge (high-precision with temperature compensation) to detect, and through high-precision signal and temperature compensation processing, it has the characteristics of high precision, low temperature drift, good linearity, etc. The sensor can effectively shield static electricity and group pulse interference of frequency converter. With overload limit, can prevent overload damage to the sensor. The sensor has 30KG,50KG,100KG,200KG and other measuring ranges.

TE200

TE200 is a high-precision networked tension amplifier, which adopts 16-bit high-precision AD sampling, sampling time is 1us, sensor signal precision is high, speed is fast, 2.8-inch color screen display, simple operation, supports 0-10V voltage and 4-20mA current output, supports 485 communication MODBUS RTU data communication and Ethernet MODBUS TCP communication, is simple and convenient to connect various PLC, standard guide rail installation, and has 4 0-10V analog inputs for PLC sampling.

TE400

TE400 is a high-precision networked full touch screen tension amplifier. It adopts 16-bit high-precision AD differential sampling, sampling time is 1us, sensor signal accuracy is high, speed is fast, and 4 tension sensors can be connected at the same time, up to 6 sensors can be connected. The 2.8-inch touch display screen is simple to operate, supports 0-10V voltage and 4-20mA current output, supports Ethernet MODBUS TCP communication, is simple and convenient to connect various PLC, and can be installed on standard guide rails.

O K Vision Inspection System

Lift up the 100% defect detection system, from full-width observation, to missing mark detection + waste discharge detection, to high-precision full-width detection + workflow system. With the modular design, customers can realize all requirements on one system through optional modules. The system uses a special contour light source to enhance the contrast between the transparent label and the backing paper. Whether the paper is transparent or non-transparent, or even white, the system can complete the detection. Can achieve almost all transparent label missing, waste detection. For blank labels, the system has an absolute advantage. The system can switch freely between normal light sources and contour light sources.

N180

N180 is a cost-effective correction controller, which is specially used to track the edge of the material and is suitable for automatic control of material collection, unwinding, intermediate guidance, etc. N180 detects the signal through ultrasonic or photoelectric sensor, calculates the offset of the material, and drives the stepping motor according to the result to correct the offset material.

O K thickness measuring system

The O K thickness measuring system detects the thickness of each measuring point through the electric guide rail belt thickness measuring sensor, generates curves, and can set upper and lower limit alarms. Through data exchange with the calendering host, the roller clearance, axis intersection and bending control of the calendering roller are realized. The internal data management and analysis system provides historical data viewing and analysis to facilitate production quality control.

N200

N200 is a correction tension integrated controller, which is specially used to track the edge of the material and is suitable for white motion control such as material rewinding and rewinding, intermediate guidance, etc. N200 detects the signal through ultrasonic or photoelectric sensor, calculates the offset of the material, and drives the stepping motor to correct the offset material according to the result.

S600 web guiding controller

S600 is a high-performance servo correction controller, using 64-bit dual-core processor, can directly drive the servo motor with encoder, button operation is simple, and the ring deviation display is more intuitive.

S2000 web guiding controller

The S2000 controller is a control device used to correct the offset and skew of materials during production or processing. It uses advanced sensor technology and sophisticated control algorithms to monitor and correct the position deviation of materials to ensure the accuracy and quality of products. With the characteristics of high-speed response and accuracy, it can adapt to the requirements of high-speed production lines.

Drive

The driver series adopts imported stepping motor, grinding ball screw, life-long maintenance-free, according to different needs, equipped with different motors, stroke, installation method, response speed, with left and right limit switches, can be adjusted externally. The driving speed is accelerated at the same time, the accuracy has been greatly improved. With limit switch, return switch, precision grinding ball screw, life-long maintenance-free, can be equipped with different stroke according to demand.The drive series adopts imported servo motor, grinding ball screw, life-long maintenance-free, according to different needs, equipped with different stroke, installation mode, response speed, and equipped with 1000 line incremental encoder, the driving speed is accelerated at the same time, the accuracy has been greatly improved. It can feedback the screw position in real time, has a return switch, and can identify the mechanical stroke with one key, precision grinding ball screw, life-long maintenance-free, and can be equipped with different strokes according to different needs.

SE-150Z

The driver series adopts stepper motor, grinding ball screw, life-long maintenance-free, according to different needs, equipped with different travel, installation, response speed, with left and right limit switches, can be adjusted externally.