重庆市恩睿斯科技有限责任公司
这是描述信息
08-28

Ultrasonic Correction Device Introduction

Chongqing Enruisi (Chongqing) Technology Co., Ltd. produces correcting machines, photoelectric correcting machines, ultrasonic rectification machines for printing equipment, rewinding machines, coating machines, bag making machines, slitting machines, laminating machines, blown film machines, etc. Ultrasonic correcting device adopts internationally advanced sensors and advanced rectification systems developed by ourselves. Widely used in machine tools for machine production, with high-efficiency automatic shifting, fast thrust and other characteristics. Ultrasonic detector made in Germany, accurate to 0.002mm accuracy, no need to pay special attention to environmental factors, free from temperature and electric wave interference, long service life, stable and efficient.
08-28

The role and application of the correction system

The rectification technology has developed rapidly in recent years. In the field of printing and packaging industry, the production equipment for handling strip-shaped materials is equipped with a high-performance automatic rectification control system, so that the production speed of the entire production line is not reduced. The quality of the manufactured products is increased by at least 5 times based on the premise. It ensures that the material does not deviate from the correct position, because even a small error, the resulting waste is unaffordable for any company.
08-28

Application of Analog Control in Correction System

What are the main aspects of the corrective controller used in the field of fuzzy control? It mainly includes the following four aspects:
08-28

Correction system industry application and working principle

The coil rectification control system is a closed-loop control system, controller, sensor, and linear guide mechanism. It is the basic part of closed-loop control. Firstly, the rectification sensor detects the edge or line of the coil, and reads the actual position of the coil and the deviation of the set position. The amount of shift is converted into an electrical signal proportional to it, and then the electrical signal is sent to the controller. The signal is amplified and calibrated by the controller, and then output to the linear driver. The linear driver drives the corrective guide according to the magnitude of the signal. The positive mechanism restores the coil to the set position. The drive signal of the current drive is only proportional to the amount of deflection of the coil, which allows precise control of the various coils and correction systems.
Pre
1
2

CHONGQING ARISE TECHNOLOGYCO.,LTD.

Focus on the development and production of position sensors, correction systems, and tension systems for optoelectronics, CCD, color sensitivity, and ultrasonic.

Welcome to leave a message for your needs!

COPYRIGHT © CHONGQING ARISE TECHNOLOGYCO.,LTD. ALL RIGHTS RESERVED       渝ICP备19008802号-1        Powered By:www.300.cn     chongqing  

  • advisory 13206199612
  • service
  • phone 023-62319036
  • TOP