W500 all-in-one machine with cutting table

Classification:

Correction system

Correction system

Keywords: coil correction tension, printing detection, tension system, still picture system

Message
  • Product Description
  • Product Data
  • Product Information
  • Product Video
    • Commodity name: W500 all-in-one machine with cutting table

    Working principle

    The rectification system is operated by a closed loop controller. First, the sensor detects the coil edge or line, the system will automatically read the actual position deviation and then set the coil position and convert the deviation to an electronic signal sent to the controller. The controller calibration signal is output to the linear actuator. The linear actuator drives the correction according to the signal amplitude. The guide rail adjusts the coil to the set position. The present actuator drive signal provides precise control over the various coils in proportion to the coil deviation.

      lTrack the edge of the coil and correct the uneven edge of the coil during winding.

      lTracking the web edge keeps the coating material at an equal distance from the web edge.

      lAccording to the running speed of different materials, the correction speed can be adjusted to match.

      lSupport three working methods: follow the line, follow the edge, and alignment.

      lSupport photoelectric sensor, ultrasonic sensor, CCD image sensor.

      lSensor parameters are automatically detected, and there is no need to calibrate the sensor in most environments.

      lAutomatic stroke measurement without mechanical limit conversion.

      lUltra-high-speed response, 500 microseconds (0.5 milliseconds).

      lDirectly connected servo motor drives the ball screw.

      lSupport simplified Chinese, traditional Chinese, English three languages.

      lConvenient and humanized operation.

  • more

Please tell us your needs and we will get in touch with you as soon as possible!