O K thickness measuring system

The O K thickness measuring system detects the thickness of each measuring point through the electric guide rail belt thickness measuring sensor, generates curves, and can set upper and lower limit alarms. Through data exchange with the calendering host, the roller clearance, axis intersection and bending control of the calendering roller are realized. The internal data management and analysis system provides historical data viewing and analysis to facilitate production quality control.

View Details

TE100

TE100 amplifier can receive the signal of two tension sensors at the same time, and adopt CPU intelligent digital processing and 16-bit high-precision AD conversion technology to carry out intelligent zero adjustment and automatic adjustment of amplification ratio. These settings can be achieved through the front three buttons, fast response, high precision, LED lights indicate, easy and reliable adjustment. The output signal of this signal amplifier is 0~10V, which can be directly connected with PLC, display instrument, etc.

View Details

A600

A600 is a CCD image sensor, which uses 5 million pixels of area array camera and CCD sensor, 64-bit dual-core CPU, sampling time of 0.1us, detection range of 40mm × 40mm, adaptive ambient light, specially used for tracking patterns, lines, edges and feature marks, real-time image display, and easier full touch operation.

View Details

S2000

The S2000 controller is a control device used to correct the offset and skew of materials during production or processing. It uses advanced sensor technology and sophisticated control algorithms to monitor and correct the position deviation of materials to ensure the accuracy and quality of products. With the characteristics of high-speed response and accuracy, it can adapt to the requirements of high-speed production lines.

View Details

Deviation correction controller S800

S800 is a high-performance servo correction controller for full touch screen operation. It is specially used for tracking material edges, tracking lines and contrast. It is suitable for automatic control of material rewinding, unwinding, intermediate guidance, etc. It calculates the offset of the material through ultrasonic, infrared and CCD sensor detection signals, and drives servo motor and coding feedback to accurately correct the offset material according to the results.

View Details

Deviation correction controller S600

S600 is a high-performance servo correction controller, using 64-bit dual-core processor, can directly drive the servo motor with encoder, button operation is simple, and the ring deviation display is more intuitive.

View Details

OR-D

The OR-D is a high-definition full-width still picture system. In order to ensure a wider shooting field of view and a longer printing period, the system uses an 8k linear array camera to phase the image. The image is magnified 25 times and is still clearly visible after processing. The shooting range includes 100mm ~ 2000mm, the maximum linear speed of the machine is 1200 M/min, and the system power supply voltage is DC24V. Used in printing, labeling and other industries.

View Details

T300

T300 is a full-automatic tension controller, which adopts 16-bit high-precision AD sampling with a sampling time of 1uS. The sensor signal has high precision and fast speed. It can drive magnetic powder brake. The sensor can connect single/double pressure sensors or work automatically without sensor internal calculation. Can be widely used in papermaking, printing, packaging, textile printing and dyeing and many other industries. The precision of tension control directly affects the processing quality of the product, so the selection of high-performance tension controller is the key to improve the processing quality of the product.

View Details

S280

S280 is a high-performance servo correction controller, which is specially used for tracking material edge, tracking line and contrast. It is suitable for automatic control of material rewinding, unwinding and intermediate guidance. It calculates the offset of material through ultrasonic, infrared and CCD sensor detection signals, and drives servo motor and coding feedback to accurately correct the offset material according to the results.

View Details

N200

N200 is a correction tension integrated controller, which is specially used to track the edge of the material and is suitable for white motion control such as material rewinding and rewinding, intermediate guidance, etc. N200 detects the signal through ultrasonic or photoelectric sensor, calculates the offset of the material, and drives the stepping motor to correct the offset material according to the result.

View Details

Ultrasonic correction sensor A200

A200 is an ultrasonic correction sensor, using Fuji high-frequency ultrasonic probe, can detect the edge of paper, printing materials, films, transparent and ultra-transparent materials, etc., can be adapted to unwinding, winding, oven export and other environments, can not be used to detect mesh materials. It can be used normally under the interference of 30000 volt electrostatic environment and high power frequency converter.

View Details

Infrared correction sensor A100

A100 is an infrared correction sensor, which can detect the edges of paper, printing film, film, non-woven fabric, gauze, screen window and other materials. It is most suitable for edge detection of materials with mesh. It cannot be used for ultra-transparent material detection. It can be used normally under the interference of 30000-volt electrostatic environment and high-power inverter.

View Details
< 123 >