News information

Exhibition Information

The working principle of the correction system

The working principle of the correction system

2019-08-28

The coil correction control system is a closed-loop controller, controller, sensor and linear guiding mechanism. First, the correction sensor detects the edge or line of the coil. The system automatically reads the offset between the actual position and the set position of the coil, converts the offset into a proportional electrical signal and transmits it to the controller. The signal is amplified and calibrated by the controller and output to the linear driver, according to the size of the signal, the linear driver drives the correction mechanism to restore the coil to the set position. The drive signal of the current drive is only proportional to the amount of coil deviation, which makes it possible for a variety of different rolls.

View Details
Introduction of Ultrasonic Correction Device

Introduction of Ultrasonic Correction Device

2019-08-28

Chongqing Enruis (Chongqing) Technology Co., Ltd. produces correction machines, photoelectric correction machines, ultrasonic correction machines, ultrasonic correction devices for printing machines, rewinding machines, coating machines, bag making machines, slitting machines, laminating machines, film blowing machines and other mechanical equipment. The ultrasonic correction device adopts international cutting-edge sensors and advanced correction systems developed by itself. It is widely used in machine tools for mechanical production, with high-efficiency automatic transmission, large thrust and fast response. German ultrasonic detector, accurate to the accuracy of 0.002mm, no special picky environmental factors, from temperature and radio interference, long service life, stable and efficient characteristics. Hope that the major manufacturers contact

View Details
Industry application and working principle of correction system

Industry application and working principle of correction system

2019-08-28

The coil correction control system is a basic part of closed-loop control system, controller, sensor and linear guiding mechanism. First, the correction sensor detects the edge or line of the coil, reads the offset between the actual position and the set position of the coil, converts the offset into a proportional electrical signal, and then sends the electrical signal to the controller. After being amplified and calibrated by the controller, the signal is output to the linear driver, according to the size of the signal, the linear driver drives the correction mechanism to restore the coil to the set position. The drive signal of the current drive is only proportional to the amount of coil deviation, which makes it possible for a variety of different rolls.

View Details
Application of Analog Control in Deviation Correction System

Application of Analog Control in Deviation Correction System

2019-08-28

What are the main aspects of the correction controller used in the field of fuzzy control? Mainly include the following four aspects: 1. The fuzzy correction controller-fuzzy controller part mainly includes three parts: fuzzification, fuzzy control rules and fuzzy elimination. In this paper, the fuzzy controller uses a Cortex-A9 microcontroller. 2. Rectification control actuator-The actuator is a domestic self-developed SE-150 rectification actuator (also known as rectification driver). As a brushless DC motor with superior performance, its maximum speed can reach 40 mm/s. 3. Rectification control pair

View Details
Baidu entry

Baidu entry

2021-04-06

View Details
< 123 >